Page 1
START GUIDE Indoor Cam 2K Pan & Tilt Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
Solid bluish violet System is initializing 2. Sign up a eufy Security account. Go to the app homepage. Tap Flashing blue and red Add Device, and add the IndoorCam Pan 2K to your system. Firmware upgrade in progress alternately 3.
MOUNTING THE INDOOR CAM • Disconnect the Indoor Cam from the power outlet before mounting. Select a Location for Mounting • Keep the Indoor Cam at least 0.7 ft / 20 cm away from walls or anything that may obstruct the view. The camera can be placed on a table, shelf, or can be mounted Do this to avoid infrared reflection which can have on a wall or ceiling.
Page 6
3. Align the holes on the mounting plate with those in the Mount the Indoor Camera ceiling. Insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such To mount the Indoor Cam on the ceiling, follow the steps below: as concrete, brick, or stucco.
LED will turn solid blue. Rotate the Indoor Cam to adjust the view and check it using the live stream which you can access in the eufy Security app. You are now all set to use your Indoor Cam.
NOTICE antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult FCC Statement the dealer or an experienced radio/ TV technician for help. This device complies with Part 15 of the FCC Rules.
Page 9
The following importer is the responsible party (contact for EU matters only) The suitable temperature for T8410 and accessories is 0°C-40°C. Importer: Anker Technology (UK) Ltd When charging, please place the device in an environment that has a normal room temperature and good ventilation.
IC Statement CUSTOMER SERVICE This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: • Warranty (1) this device may not cause interference, and 12-month Limited Warranty (2) this device must accept any interference, including interference that may cause undesired operation of the device."...
Need help?
Do you have a question about the T8410 and is the answer not in the manual?
Questions and answers