If you have any problems, please contact us at cs@nexigo.com at anytime for further assistance. This product is covered by our generous 1-year manufacturer's warranty, please visit www.nexigo.comfor more warranty information and register on www.nexigo.com/warranty for an EXTRA ONE YEAR warranty
Brand: NexiGo
Website www.nexigo.com
Manufacturer: Nexight INC
Email: cs@nexigo.com
Tel: +1(458)215-6088
Address 11075 SW 11th St. Beaverton. OR 97005, US
Product Introduction
The charging dock is specially designed for charging P-5 controllers. It can charge for two P-5 controllers simultaneously and feature a built-in direct-current electro circuit with boosting and stable voltage that can provide stable voltage for charging. As long as the power is connected, the blue atmosphere light will be on.
Product Structure Diagram
![Nexigo - 0557WHT - Product Structure Diagram - Part 1 Product Structure Diagram - Part 1]()
![Nexigo - 0557WHT - Product Structure Diagram - Part 2 Product Structure Diagram - Part 2]()
Product Features
- The output current is controlled by intelligent micro control technology.
- Anti-slip rubber pads keep the P-5 controller charger firm y in place. It is enough to support the weight Of them. Two charging slots are in the middle and can charge two P-5 controllers at the same time.
- After connecting the power supply, the blue atmosphere light will be on, which increases the sense of mystery.
- The brief color and aesthetic appearance are perfect y integrated with your P-5 console.
Charging Instruction
- The power interface is located on the back of the charger and can be connected by USB A to C charging cable.
Note: Please use a 5V/2 A power source or connect the USB port in front of the P-5 console to charge to ensure fast charging. - After connecting the power supply. The blue atmosphere light will be on.
- As shown
in the schematic diagram for charging, the P-5 controllers can be charged after inserted into the two transparent charging slots.
NOTE: - The controller must be placed horizontally and inserted in the middle.
- The type-c input interface in the middle of the controller must be aligned with the type c output interface of the charging dock and insert into the charging slot.
- Please use a 5V/2A power source or connect the USB port in front of the P-5 console to charge to ensure fast charging.
Specifications
Input | 5V/2A |
Output | 5V/500mA*2 |
Cable length | 2.62 ft |
Working temperature | -10-45C |
Storage temperature | 40-70C |
Package includes | Charging dock x 1, type-c charging cable and user manual x 1 |
NOTICE
- If the input power is insufficient, the charging time of the charging station maybe extended.
- When the controller's battery power up to 80% and above, the controller will not be charged if you remove the controller and put it back. Due to the battery protection function, the dock will continue to charge only after the battery power of the controller drops below 80%.
- ONLY FRONT USB PORTS OF THE P-5 CONSOLE HAVE ENOUGH POWER.
Attentions
- The power adapter should be unplugged when the product is fully charged or not in use.
- This product cannot be used and stored in a humid environment
- This product should be kept out of dust and heavy loads to guarantee its service life.
- Please do not use the charger that is soaked, crushed, or broken.
- Do not use external heating equipment such as microwave ovens for drying.
- If it is damaged, please send it to the maintenance department for repair. Do not disassembly it by yourself
- Keep this product away from children.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Need help?
Do you have a question about the 0557WHT and is the answer not in the manual?
Questions and answers