NexiGo S20, S20B Manual

Table of Contents

PRODUCT OVERVIEW

Peel off the tape backing from the Cable Clip.
Attach the Cable Clip to the Headset Support.
Slide the combined Headset Support onto the Support Column.
Insert the Support Column to the Charging Base.
Remove the Magnetic USB-C Connector from the Magnetic Charging Cable.
Insert the USB-A end of the Magnetic Charging Cable into the Charging Base and put the magnetic end into the Cable Clip.
Insert the Magnetic USB-C Connector into the charging port of your Headset/EIite Strap.
Place the headset onto the Headset Support and connect the Magnetic Charging Cable.
Remove the original battery covers and batteries from controllers.
Install the provided Rechargeable Battery with correct polarity, then close the provided Replacement Battery Cover.
Place the controllers into the Controller Charging Slots. Connect the charging dock to the power supply using the 5V 4A Power Adapter.

Only use the provided charging cable. power adapter. batteries and other accessories that the package comes with to pcn.nuer the unit using any other power adapter or cables may cause damage to the unit.
Do not place the battery on any metal surfaces or tables. If both metal tabs on the battery touch a metal object it will discharge the battery, potentially causing damage to the battery or the surface, and could potentially result in injury.
Do not stick foreign objects into any of the openings on this unit. You may damage the unit or cause harm to yourself.
When this unit is not in use It is recommended that you unplug it from the power source.
Only use on a flat, horizontal surface.
The unit cannot be used and/or stored in high humidity conditions. Keep this unit dry.
Please use a dry cloth to clean the unit. Do not clean the unit with water or alcohol. The water or alcohol will now into the unit along the heat dissipation holes, which will damage the unit due to the short circuit. When cleaning. please unplug the unit first.
To ensure longevity and lifespan of the unit. protect it from dust and do not place other consoles or objects on it.
If the unit is damaged, please exercise the warranty or dispose of the item. Do not attempt to open and repair it independently.
Keep away from small children due to potential shock hazards.

USB-C Input	5V 4A
USB-A Output	5V 400 mA
Magnetic USB-C Output	≤2000mA
Controller Charging Port Output	≤800mA
Total Charging Time	Approx. 2.5 hours
Rechargeable Battery' Capacity	2 x 1850mAh
Power Adapter Input	100-240V. 50-60Hz. 0.6A Max
Power Adapter Output	5V 4A