NexiGo S20 Pro Manual

Also See for S20 Pro:

Quick start manual (4 pages)

Table of Contents

Contents

1 PRODUCT OVERVIEW
2 ASSEMBLY INSTRUCTIONS
3 Specifications
4 SUPPORT
5 Documents / Resources
- 5.1 References
- 5.2 Download manual

NexiGo S20 Pro Manual

PRODUCT OVERVIEW

Charging Base
Right/Left Controller Charging Indicators
Right/Left Controller Charging Slots
Headset Cable Power Port
USB-C Power Input Port
USB-A Power Output Port
Wire Clip
Headset Support
Elite Strap Support
Support Column
Magnetic USB-C Connector
Magnetic Charging Cable
Replacement Magnetic Battery Covers
Rechargeable Batteries
Magnetic USB-C Connector Removal Tool
5V 4A Power Adapter
Touch Control Area for Headset Charging Indicator

ASSEMBLY INSTRUCTIONS

Peel off the tape backing from the Wire Clip.
Attach the Wire Clip to the Headset Support.
Slide the combined Headset Support onto the Support Column.
Insert the Support Column to the Charging Base.
Remove the Magnetic USB-C Connector from the Magnetic Charging Cable.
Insert the USB-A end of the Magnetic Charging Cable into the Charging Base and put the magnetic end into the Wire Clip.
Insert the Magnetic USB-C Connector into the charging port of your Headset/Elite Strap.
Place the headset onto the Headset Support and connect the Magnetic Charging Cable.
Remove the original battery covers and batteries from controllers.
Install the provided Rechargeable Battery with correct polarity, then close the provided Replacement Battery Cover.
Place the controllers into the Controller Charging Slots. Connect the charging dock to the power supply using the 5V 4A Power Adapter.

warning Notes:

Only use the provided charging cable, power adapter, batteries, and other accessories that the package comes with to power the unit. Using any other power adapter or cables may cause damage to the unit.
Do not place the battery on any metal surfaces or tables. If both metal tabs on the battery touch a metal object it will discharge the battery, potentially causing damage to the battery or the surface, and could potentially result in injury.
Do not stick foreign objects into any of the openings on this unit. You may damage the unit or cause harm to yourself.
When this unit is not in use. It is recommended that you unplug it from the power source.
Only use on a flat, horizontal surface.
The unit cannot be used and/or stored in high humidity conditions. Keep this unit dry.
Please use a dry cloth to clean the unit. Do not clean the unit with water or alcohol. The water or alcohol will flow into the unit along the heat dissipation holes, which will damage the unit due to the short circuit. When cleaning, please unplug the unit first.
To ensure longevity and lifespan of the unit, protect it from dust and do not place other consoles or objects on it.
If the unit is damaged, please exercise the warranty or dispose of the item. Do not attempt to open and repair it independently.
Keep away from small children due to potential shock hazards.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Specifications

USB-C Input	DC 5V 4A
USB-A Output	DC 5V 400mA
Magnetic USB-C Output	≤ 2000mA
Controller Charging Port Output	≤ 800mA x 2
Total Charging Time	Appr. 2.5 hours
Rechargeable Battery Capacity	1850mAh x 2