NexiGo 2515 Manual

Also See for 2515:

Table of Contents

Contents

NexiGo 2515 Manual

PRODUCT OVERVIEW

Insert the Headset Support Column into the Charging Base.
Attach the Headset Support Panel to the Headset Support Column.
Insert a Magnetic Charging Adapter into each of the controllers.
Place the controllers into the Controller Charging Slots, making sure to line up the Magnetic Charging Adapters on the controllers with the magnetic surface in the Charging Base.
Place the VR headset onto the Headset Support Panel.
Power the Charging Dock using either of the following methods:
- Plug the USB-A to USB-C Power Cable into the PS5 console, or
- Plug the Power Cable into the wall using a 5V 2A adapter (not included) for a faster charging speed.

Power Input	DC 5V 1.5A
Charging Current for Each Controller	≤500mA
Charging Time	Approximately 1.5-2 hours

1 x Headset Support Panel
1 x Charging Base
2 x Magnetic Charging Adapters
1 x Headset Support Column
1 x USB-A to USB-C Power Cable

When the Charging Dock is not in use, we recommend unplugging it from the power source.
Only place the Charging Dock on a flat, horizontal surface. The Charging Dock cannot be used or stored in high humidity conditions.
When cleaning, please unplug the Charging Dock first. To ensure its longevity, keep it clean and free from dust.
Do not use the Charging Dock for anything other than its intended purpose.
If the Charging Dock is damaged, please exercise the warranty or dispose of the item. Do not attempt to open and repair it yourself.
Keep the Charging Dock out of reach from small children to avoid potential shock hazards.