NexiGo P5133 Manual

PRODUCT INTRODUCTION

This PS5 Wall Mount with Dual Charging Station is designed to organize your PS5 console and can support both Digital and Disc versions. The wall mount is equipped with a 5V 2A power adapter to provide faster charging. The LED indicators on the charging station will provide an easy-to-read status on your controller's charging status, displaying an orange light when they are charging and a blue light when they are fully charged.

Installation Video

PRODUCT DETAILS

1. Charging Slot 1
2. LED Indicator
3. Type-C Power Interface
4. Power Button
5. Charging Dock
6. Charging Slot 2
7. Wall Mount

PRODUCT INSTRUCTIONS

Step 1: Align one of the U-shaped spacers with the holes on the base of the wall mount. Insert a screw through one of the holes in the U-shaped spacer and fasten it with a washer on the other side. Repeat this process with the other screw, and then repeat the process with the other U-shaped spacer. Ensure that both U-shaped spacers are installed before moving on to Step 2.

Step 2: Position the stand where you want it and then locate the screw holes in the wall mount. Mark each hole with a pencil/pen to ensure that the tapping process will be accurate.

Step 3: Drill a hole with 15/64" drill bit at each mark. (Drill and drill bits NOT included.)

Step 4: Insert a plastic wall plug into each hole and hammer in the plastic wall plugs so they are nearly flush with the wall surface. (Hammer NOT included.)

Step 5: Insert a screw through the hole in the wall mount and into the plastic wall plug, then do the same with the rest holes in the wall mount. Tighten screws snugly, being careful not to overtorque or strip the screw heads.

Step 6: Place your PS5 console on the wall mount and align its safety lock screw hole with the opening on the bottom of the mount. There are two openings for the screw placement, one for each version of the console. Once you have aligned the PS5 screw hole with the opening on the bottom of the mount, insert the safety screw and tighten it.

Step 7: Place the charging dock in the slot in front of the PS5 console. You can power the charging dock with either the provided USB cable or power adapter.

Step 8: Tap the power button to toggle on/off the charging dock (Note: Please ensure that the power button is turned on and lit up before charging. The controllers will not charge if it is off.)

FEATURES

• An intelligent microchip within the charger protects the controllers from damage and displays an easy-to-read charging status.
• Can charge two PS5 controllers simultaneously.
• The LED charge indicator light displays an orange hue while charging a connected controller. This indicator changes to a blue light when the controller is fully charged.
• Minimalistic aesthetic for convenience and adaptability.

CHARGING INSTRUCTIONS

• Power the charging dock with either the provided USB cable or the provided power adapter.
• A white power indicator light will display in the lower left hand corner of the dock next to the power button when the dock is on. Tap the power button to power on the charging dock. This will cause the logo at the center to illuminate and will cause both charging indicators to flash orange and blue.

Note: The power button is a touch controlled button and can be toggled on/off with a simple tap.

SPECIFICATIONS

Input: DC 5V 2A

Output: DC 5V 1.5A

Charging Time: ~2.5 Hours

LED Indicator: Orange (Charging), Blue (Fully Charged)

Product Size: 10.16 X 1.97 X 2.28 Inches

WHAT'S IN THE BOX?

1 X PS5 Controller Charging Dock
2 x U-Shaped Spacers
1 X Screwdriver
1 X USB Cable
1 X PS5 Wall Mount
1 X Screws Bag
1 X User Manual
1 X Adapter

NOTES

• SAFETY WARNING: HAZARD - Small Parts-Not intended for children under 5 years of age.
• Power the charging dock with either the provided USB cable or the provided power adapter. Other Type-C power supplies may cause charging failure or extended charging duration.
• To ensure longevity and lifespan of the wall mount do not place any objects other than the console or accessories on the wall mount. Keep this product dry.
• This product cannot be used and/or stored in high humidity conditions.
• When this unit is not in use or when docked controllers are fully charged, it is recommended that you unplug it from the power source.

CONTACT INFORMATION

Tel: +1(458) 215-6088

Website: www.nexigo.com

If you have any problems please contact us at cs@nexigo.com at any time for further assistance. This product is covered by our industry leading 1-year manufacturers warranty. Make sure to register your purchase at nexigo.com/warranty within 14 days of the delivery date to extend your warranty coverage to TWO Years!

Documents / Resources

References

• NexiGo | Home Theater Projectors & Video Collaborations
• NexiGo Warranty Registration | NexiGo

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download NexiGo P5133 Manual