Page 1
Master Your Oxypure Owner’s Manual Model: 47010 Scan the code to find how-to videos and more! Questions or Concerns? Amazon Purchases: support@nuwavenow.com All Other Purchases: help@nuwavenow.com 1-888-502-7805 1-877-689-2838 Mon-Fri 7:30am-4:30pm CST...
Page 2
THANK YOU! Congratulations on your Nuwave® purchase. We know there are many options available and sincerely appreciate the trust you have placed in us. For the last 30 years, we have committed to introducing products that promote healthy living at affordable prices. By combining the highest quality designs with cutting edge technology, we have always strived to blend feature, function, and innovation into every product we make.
TABLE OF CONTENTS Safeguards & Information ..................4–5 Parts & Accessories ........................6 Assembly..........................7 WiFi Connection ........................8-9 Operation ..........................9-11 Cleaning and Maintenance .....................12-15 Troubleshooting Guide ......................16 Limited Warranty ........................17-19 Meets California ozone emissions limit. CARB certified U.S Environmental Protection Agency This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
IMPORTANT SAFEGUARDS HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE ALWAYS KEEP THIS MANUAL HANDY FOR FUTURE REFERENCE. READ ALL INSTRUCTIONS and WARNINGS: The failure to follow any of the important safe- guards, warnings, or instructions for safe use is a misuse of the OxyPure that can void your warranty and create the risk of serious injury.
4. ALWAYS replace your filters with only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, Nuwave filters made for your model of air contact qualified personnel to install the proper purifier.
PARTS Front Air Vent Part #: OXA1 Filter Slot Cover Part #: OXP6 Sensor Cover Part #: OXP3 HEPA/Carbon Filter Part #: OXA5 Ozone Emission Removal Filter Part #: OXA6 Bio-Guard® Filter Part #: OXA7 Stainless Steel Pre-Filter Part #: OXA8 Back ORDERING PARTS Keeping your OxyPure up and running with new filters is a breeze.
ASSEMBLY Access to Filters Open Close Stainless Steel Bio-Guard™ Filter Ozone Emission HEPA/Carbon Filter Pre-Filter Removal Filter Before Use: 1. Make sure the OxyPure is unplugged. Open the panel ® on the back to expose the filters. 2. Pull the filters from their slots. 3.
Google Play Store or the Apple AppStore, then just follow the download and 3. In the Nuwave® Connect app, tap the + installation instructions. symbol, then tap Auto Scan and select your device.
Page 9
App. 5. Once the OxyPure is connected, tap Done. 3. Connect your phone to the available hotspot. 4. Once connected, return to the Nuwave Connect App and the unit will begin connecting automatically. 5. When the Oxypure is successfully connected, tap Done.
OPERATING THE OXYPURE CONTROL PANEL • POWER • MODES & FUNCTIONS The OxyPure’s control panel allows you to turn the unit on and off, choose an operating mode or function and monitor your filter health. RESET FILTER 2 RESET FILTER 4 HOLD FOR 2 SECONDS HOLD FOR 2 SECONDS POWER...
Page 11
OPERATING THE OXYPURE CONTROL PANEL • POWER • MODES & FUNCTIONS 2 BUTTONS FUNCTIONS FAN SPEED You can adjust from 6 different speeds. ECO-FRIENDLY MODE 1. Press FAN SPEED to adjust. • The fan cannot be turned off. Allows you to save energy by turning off the •...
CLEANING & MAINTENANCE Your OxyPure can easily be moved from one location to another. Just hold the OxyPure by the handles on each side and roll the OxyPure to the chosen location. The wheels underneath provide extra maneuverability and mobility whenever it’s needed. Handles Wheels Before First Use...
Page 13
CLEANING & MAINTENANCE CLEAN THE OZONE EMISSION REMOVAL CLEAN THE PRE FILTER: FILTER: 1. Use a vacuum with a brush attachment. WARNING 2. Clean the Filter with warm soapy water. DO NOT Immerse, wash or wipe with water, 3. Rinse the Filter thoroughly Pre Filter this will result in permanent damage to the and remove any soap particles.
Page 14
CLEANING & MAINTENANCE Resetting the Filter and Air Quality Indicators For Filter 4: Press and hold TURBO Filter 2: Press and hold TIMER for for 2 seconds until a beep is heard. ODOR 2 seconds or until a beep is heard. •...
Page 15
CLEANING & MAINTENANCE Cleaning the Inflow Vent Cleaning the Filter Sensor The Inflow Vent is located at the bottom of the The Filter Sensor is located on the back, above unit as shown. the Filter Slot Cover. 1. Open the Sensor Cover. BOTTOM 2.
TROUBLESHOOTING GUIDE The OxyPure does not turn on. 1. The plug is not in the wall outlet. Plug into wall outlet. 2. POWER on the touchpad panel is not on. Press POWER. 3. The Filter Slot Cover in the back rear is off or loose. Make sure Filter Slot Cover is on securely. TIMER does not work when pressed.
Manufacturer’s written instructions. The Limited Warranty covers the Original Purchaser only. The Manufacturer will provide the necessary parts and labor to repair the product at the Nuwave LLC Service Department. After the expiration of the warranty, the cost of the parts and labor will be the responsibility of the owner.
Page 18
(30) days from the date of product delivery to opt out of arbitration with respect to any dispute arising out of or relating to use or purchase of any Nuwave product. If more than 30 days have passed, you are not eligible to opt out of arbitration and will have waived your right to sue or participate in a class action with respect to the dispute arising out of your purchase or use of a Nuwave product.
Page 19
LIMITED WARRANTY NOTES Para la versión en español de este manual, visita www.nuwavenow.com. nuwavenow.com | 19...
Need help?
Do you have a question about the OXYPURE 47010 and is the answer not in the manual?
Questions and answers