Aethlabs microAeth AL30 Quick Start Manual page 10

Access the microAeth interface webpage by connecting to the common local WiFi
network that the microAeth is also connected to.
1) Turn on the AL30.
2) Open the WiFi Settings or available WiFi networks viewer on your computer, tablet, or
phone.
3) Browse the available WiFi networks and select the WiFi SSID of the network that the
microAeth is also connected to.
3) When asked, enter the corresponging password for the WiFi network.
4) Once a WiFi connection is established, open a web browser with
URL: "https://AL30-<xxxx>.local" where <xxxx> matches the unique 4 digits of the AL30
serial number. Example: "https://AL30-0001.local"
5) The microAeth interface webpage will ask for the instrument password, which is the
same password as the microAeth Access Point WiFi SSID password.
6) The microAeth interface webpage will load and can be used for configuration and
control of the microAeth and data download.
Configuration
Configure the microAeth using the microAeth interface webpage:
The microAeth interface webpage is a locally hosted webpage that can be accessed using
any web browser when connected directly to the microAaeth hosted WiFi network or when
connected to the common local WiFi network that the microAeth is also connected to.
Connect to the microAeth interface webpage: See instructions in the previous Section:
Initial Setup and WiFi Communications.
microAeth Interface Webpage Status:
This page will refresh with the latest device information:
1) Whenever a setting is changed or a button is clicked.
2) Automatically every 60 seconds (the hourglass icon will turn orange when a refresh will
happen within the next 5 seconds).
3) When the 'Refresh now' button is clicked.
AL30 Quick Start Guide
microAeth
®
18
>5 seconds until interface page refresh
≤5 seconds until interface page refresh
To see details when the page was last refreshed with the latest device information, the
user can click on the Current Status hourglass icon. A pop-up will show the following:
1) Time of last page refresh
2) Count down until next automatic page refresh
3) Button to refresh page now
Click to refresh
page now
IMPORTANT: In order to change instrument settings, the AL30 must stop sampling:
1) When the AL30 is Sampling, click the
the Current Status section of the microAeth interface webpage.
2) When Samping is stopped using the microAeth interface webpage, the Operation status
will change to 'Idle' and a notification will appear showing a 60 second count down until
the AL30 will restart sampling automatically.
3) To Cancel the automatic sampling restart, click the 'Cancel sampling restart' button.
4) A notification will appear to confirm the cancellation of the automatic sampling restart.
Click to cancel
automatic
sampling restart
AL30 Quick Start Guide
AethLabs microAeth
®
Click hourglass icon to see
interface page details
Stop Button
Stop button next to the Operation Sampling in
AethLabs
19