Related Manuals for KaVo SONICflex prep crown
Summary of Contents for KaVo SONICflex prep crown
- Page 1 SONICflex prep crown SONICflex prep crown round tip no. 97 - 1.008.6383 SONICflex prep crown round tip no. 97 A - 1.008.6384 SONICflex prep crown plain tip no. 98 - 1.008.6385 SONICflex prep crown plain tip no. 98 A - 1.008.6386...
- Page 2 Distributed by: Manufacturer: KaVo Dental GmbH KaVo Dental GmbH Bismarckring 39 Bismarckring 39 88400 Biberach 88400 Biberach Germany Germany Phone +49 7351 56-0 www.kavo.com Fax +49 7351 56-1488...
-
Page 3: Table Of Contents
Instructions for use SONICflex prep crown Table of contents Table of contents 1 User instructions....................... 2 Safety ..........................2.1 Infection hazard......................7 2.2 Technical condition......................7 2.3 Accessories and combination with other equipment ............8 2.4 Qualification of personnel....................8 2.5 Protective equipment .................... -
Page 4: User Instructions
SONICflex is a registered trademark of KaVo Dental GmbH. All other trademarks are property of their respective owners. KaVo Original Factory Repair In the event of a repair, please ship your product to the KaVo Original Factory Repair using www.kavobox.com. KaVo Technical Service... - Page 5 Instructions for use SONICflex prep crown 1 User instructions Information on the packaging Material number Production batch LOT T Manufacturer Note: Please note accompanying documents Follow the electronic instructions for use HIBC Code UDI symbol CE mark for medical devices...
-
Page 6: Hazard Levels
Instructions for use SONICflex prep crown 1 User instructions Hazard levels The warning and safety notes in this document must be observed to prevent personal injury and material damage. The warning notes are designated as shown below: HAZARD In cases which – if not prevented – directly lead to death or severe injury. -
Page 7: Safety
4 Place the torque wrench on the tip when the handpiece is in its holder. 2.2 Technical condition A damaged product or damaged or NOT KaVo original components could injure patients, users or third parties. 4 Only operate devices or components if they show no signs of damage on the outside. -
Page 8: Accessories And Combination With Other Equipment
Working with sharp or pointed products can lead to injuries or infections. 4 Use a glove or finger guard when you test, insert and remove the tips. KaVo recommends always working with a rubber dam and a dust extraction system. -
Page 9: Product Description
▪ Intended for dental treatment only. All other types of use of or modifications to the product are not permitted and can be hazardous. The SONICflex prep crown tips are used in combination with the SONICflex for the finishing work on crown edges in crown preparation. -
Page 10: Identification Of Tip Type
Instructions for use SONICflex prep crown 3 Product description | 3.4 Identification of tip type ② tip no. 98 A transition from front to jacket side slightly rounded, jacket sur- face 3° divergent, graining D 46 – REF 1.008.6386 3.4 Identification of tip type Identification of tip type Tips without "A"... -
Page 11: Startup And Shut Down
Dispose of and recycle the packaging appropriately in accordance with current packaging law, employing waste management / recycling companies. Comply with the comprehensive return system. KaVo has had its packaging licensed for this purpose. Please comply with the regional public waste-disposal system. -
Page 12: Removing The Sonicflex Tip
Instructions for use SONICflex prep crown 4 Startup and shut down | 4.2 Removing the SONICflex tip CAUTION Tip incorrectly inserted in the torque wrench. Danger of injury to the user. 4 When inserting the tip into the torque wrench, make sure that the end of the tip always faces the recess of the torque wrench. -
Page 13: Operation
5.1 Setting the power on the SONICflex CAUTION Improper or excessive power setting. Tip fracture and malfunction. 4 It is essential to comply with the recommended settings for the KaVo SONICflex as shown in the table. LEVEL 1 = LEVEL 2 =... -
Page 14: Reprocessing Steps In Accordance With Iso 17664-1 / Iso 17664-2
Malfunction and material damage. 4 Reprocess it in a washer disinfector only. KaVo recommends the following products based on the compatibility of the ma- terials. The microbiological efficacy must be ensured by the disinfectant manu- facturer and proven by an expert opinion. -
Page 15: Automated Reprocessing
Instructions for use SONICflex prep crown 6 Reprocessing steps in accordance with ISO 17664-1 / ISO 17664-2 | 6.3 Automated reprocessing For effective reprocessing, automated internal and external cleaning as well as automated internal and external disinfection with a cleaning and disinfection unit in accordance with EN ISO 15883-1 is required. -
Page 16: Automated Drying
NOTE Please comply with the instructions for use of the washer disinfector. 4 In order not to affect the KaVo medical device, make sure that the product is dry on the inside and outside after completion of the cycle. 6.4 Care products and systems - Servicing Not applicable. -
Page 17: Storage
Instructions for use SONICflex prep crown 6 Reprocessing steps in accordance with ISO 17664-1 / ISO 17664-2 | 6.7 Storage Sterilisation parameters: Select a suitable process from the following sterilisation processes (depending on the available steriliser): ▪ Steriliser with triple pre-vacuum: –... -
Page 18: Other Products
Instructions for use SONICflex prep crown 7 Other products 7 Other products Available from specialised dental dealers. Consumables Material summary Material number Torque wrench 1.000.4887 Nozzle needle 0.410.0911 Cleaning adapter Material summary Material number Cleaning adapter for SONICflex tips, 1.009.7875...
Need help?
Do you have a question about the SONICflex prep crown and is the answer not in the manual?
Questions and answers