Advertisement
Quick Links
Technical Support and E-Warranty Certificate
www.vevor.com/support
PNEUMATIC ENGRAVING
MACHINE INSTRUCTIONS
MODEL: KD-Q102
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Advertisement
Related Manuals for VEVOR KD-Q102
Summary of Contents for VEVOR KD-Q102
- Page 1 PNEUMATIC ENGRAVING MACHINE INSTRUCTIONS MODEL: KD-Q102 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
- Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
-
Page 3: Safety Instructions
SAFETY INSTRUCTIONS WARNING: 1. Engraving machine needs to connect 60psi/ min, 80psi oil-free and water-free air compressor, if the existing is not oil-free and water-free air compressor, please install oil-water filter before connecting the engraving machine. 2.The air source is connected with oil and water, which will damage the engraving machine. - Page 4 10. Do not operate this appliance if the cord or plug is damaged. Return it to the store of service or repair by a professional serviceman. SAVE THESE INSTRUCTIONS MODEL AND PARAMETERS Model KD-Q102 Voltage 120V Frequency 60HZ Power...
-
Page 5: Structure Diagram
STRUCTURE DIAGRAM 1.Gas-pressure gauge 2.Knob transfer handle 1-2 switch 3.Handle 1-2 quick connection ports 4.Air pressure foot switch 5.Engraving handle speed control knob 6.Power switch 7.Air pressure adjustment knob for auxiliary equipment 8.Auxiliary air pressure connections for other devices 9.Power input port 10.Fuse holder 11.Control working air pressure 12.Air intake connection port... - Page 6 COMPONENTS Picture Name Host equipment Foot switch handpiece Power cord air tube Hexagonal wrench Spring Sealing ring - 5 -...
-
Page 7: Operation
OPERATION Connect the original foot switch with the foot icon port on the fuselage back, ensure that the hose has a good access interface and there will be no air leakage after the equipment works. The device has a carving handle insertion interface, and the force control is controlled by the size of the compressed air - 6 -... - Page 8 Pull the knob up one step, the impact speed can be adjusted and the air pressure can be controlled. The carving handle is compact and flexible, convenient and efficient, and can be operated with multiple functions The two carving handles can be installed with different carving knives to carve different patterns.
- Page 9 All kinds of carving knife display map, not come with the equipment. After you use the engraving machine for a period of time, you should discharge the water in the air filter in time, just press and hold the needle at the bottom of the air filter up.
- Page 10 Maintenance Guidelines If the pneumatic machine is not working, first check the internal motor spindle and rotate it by hand to check if it is stuck. You can also turn on the machine to see if the spindle can be started. If the spindle and graphite converter are stuck.
- Page 11 After starting up, the pressure gauge can adjust the pressure, the internal motor can work, the handle does not work, and there is no air output, which is due to damage to the internal solenoid valve When you use the handle for 24 hours, you find that the handle is not strong enough, you can unscrew the handle, take out the elastic circle and small round bar in the handle with a soft paper or cloth to clean it, and also clean the inner diameter of the handle, add two drops of special oil for...
- Page 12 Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the KD-Q102 and is the answer not in the manual?
Questions and answers