Advertisement
Troubleshooting
Detector does not turn on, or turns off by itself
1.
Replace the batteries.
Detector does not detect anything
2.
Make sure you are sweeping the coil close enough to the ground (i.e. make sure the coil is close enough to the
target to detect it).
3.
Ensure that the Search Coil is connected properly.
4.
Increase the Sensitivity level
Erratic/excessive noise
1.
Restart the detector and check for noise again.
2.
Move away from local sources of electrical interference.
3.
Reduce the Sensitivity level
Multiple Target Groups are flashing, and there are lots of beeps
1.
You may be detecting multiple different targets at the same time (overlapping objects).
2.
The detected object is complex (rusty or made of multiple types of metal), so the detector is unable to properly
identify it. Try approaching the target from different angles.
(page
9).
(page
9).
14
Advertisement
Need help?
Do you have a question about the X-TERRA INTREPID and is the answer not in the manual?