PowerA GALACTIC VORTEX User Manual page 6

LUMECTRA LIGHTING
The Galactic Vortex controller features 6 separate Lumectra lighting modes that you can customize:
COLOR SELECT
ACTIVE MOTION
6
LIGHT SPIRAL
REACTIVE PULSE
To switch between each mode, quick-tap the LEDS
button . To edit the settings for the selected mode,
follow the steps in the next section .
ENTER AND EXIT LUMECTRA
SECTOR BURST
PROGRAM MODE
1. To enter Lumectra program mode, hold the LEDS
2. Follow the editing steps in the following sections to
OFF
button ( ) on the back of the controller for 2
seconds.
• The Lumectra lighting will flash 3 times to
indicate the controller is in Lumectra program
mode.
adjust the Lumectra settings. Once complete, hold
the LEDS button on the back of the controller for 2
seconds to save the Lumectra settings.
• The Lumectra lighting will flash 3 times to
indicate the settings have been saved and the
controller is now out of Lumectra program mode.