Removing Fabric Covers; Headrest Fabric Cover; Backrest Fabric Cover; Side Wings Fabric Cover - Chicco KEYFIT STRADA BOOSTER Manual

Booster seat
Table of Contents

Advertisement

REMOVING FABRIC COVERS

The fabric covers for the headrest, backrest and seat are attached with
Velcro straps and zippers, so they are convenient to remove.

Headrest Fabric Cover

Unzip the headrest's 2 side zippers,
then unfasten the 3 strips of Velcro.

Backrest Fabric Cover

Unzip the backrest zipper and remove
backrest and headrest fabric cover.

Side Wings Fabric Cover

Remove the small fabric covers on the
side wings.
36
REMOVING FABRIC COVERS

Seat Fabric Cover

The seat is made of two rigid plastic parts hooked to each other. The top
part is covered with fabric and the lower part is black plastic. To remove
the fabric cover from the seat, it is necessary to separate the two plastic
parts.
Remove the backrest as instructed on
1
page 24 and turn seat base upside down.
Turn the 4 seat locking dials, on the
2
lower part, until the reference circles
match the OPEN positions.
Check that the small reference circles (located on the black plastic)
are fully aligned to the OPEN position to correctly unlock the two plastic
parts.
1
2
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Keyfit strada

Table of Contents