USING BOOSTER
WITHOUT
Removing the Backrest
This child restraint can be used as a backless booster if the child
meets all the requirements on page 23.
To make removing the backrest more convenient, adjust backrest to
tallest height position.
Place the booster onto a flat surface.
1
Pull out the seat back lock.
Slide the two backrest locking buttons
2
(located on the joint) in towards the center.
Pull up to remove the backrest and
3
release the two buttons.
BACKREST
1
2
3
24
USING BOOSTER
WITHOUT
After removing backrest, take plastic
4
square out of the fabric panel.
Tuck fabric panel under seat pad
5
between the fabric cover and the seat
frame.
Be sure fabric panel is smoothly
6
resting between the fabric cover and the
frame to provide extra padding.
Store plastic square behind
backrest fabric cover.
BACKREST
4
5
6
25