USING BOOSTER
WITHOUT
Attaching the Shoulder Belt Clip
Use Shoulder Belt Clip only when using booster WITHOUT backrest.
Shoulder Belt Clip comes in plastic
1
bag with instructions. After backrest is
removed, retrieve the shoulder belt clip
and webbing from the clear plastic bag.
Securely fasten the Shoulder Belt Clip
2a
to the seat back lock by looping the webbing
strap around the seat back lock.
Then put the red shoulder belt clip
2b
through the loop of black webbing at the
end of the strap.
Pull Shoulder Belt Clip through the
3
webbing loop completely to secure it tightly.
After attached, push in seat back lock.
4
BACKREST
1
2a
2b
3
4
26
USING BOOSTER
WITHOUT
Adjusting the Shoulder Belt Clip
Pull black webbing strap to adjust the
1
height of the shoulder belt clip.
Shoulder Belt Clip must be at or
2
slightly above child's shoulders.
When using this booster WITHOUT Backrest, you must use the
shoulder belt clip.
Installing Booster WITHOUT Backrest
Place the booster on the vehicle seat
1
so the back of the booster is flat against
the back of the vehicle seat.
BACKREST
1
1
27