Connecting To A Projector - Dell AXIM X50 System Information Manual

power
cord
AC adapter
sync cable

Connecting to a Projector

You can connect the device to a projector using a VGA cable.
NOTE:
The VGA option is available only with the VGA model of the device.
NOTE:
The VGA cable will not ship with your device unless you ordered it.
NOTE:
You need to install the Viewer program for the device to detect the
projector. To configure the program, see the Help section in the program.
To connect the device to the projector, connect the sync connector on the
VGA cable to the device, and then connect the other connector of the VGA
cable to the projector cable. Run the Viewer program for the device to detect
the projector.
device connector
sync cable connector
use this cable end to
connect to a computer
or a projector
System Information Guide
USB connector
on the computer
21