Using The Battery; Installing And Removing The Battery - Dell AXIM X50 System Information Manual

Using the Battery

CAUTION:
follow the safety instructions on page 5.
NOTICE:
Do not use your device until you have charged the main battery for at
least 8 hours for the first charge.
Before you use your device for the first time, you must install and charge the
battery. Once the battery is charged, use the power properties to monitor the
battery charge. See Pocket PC Help on the device for more information.

Installing and Removing the Battery

To install the battery:
1
Ensure that the device is turned off.
2
Align the battery contacts with the contacts in the battery slot, insert
the battery, and lower the battery into the slot until you feel a click.
battery
3
Close the battery cover.
4
Lock the battery cover by sliding the battery latch to the right.
NOTE:
The device starts immediately once you insert the battery for the first
time and lock the battery latch.
Before performing any of the procedures in this section, read and
System Information Guide
13