Daewoo Daema DWC-1018JD User Manual page 27

Troubleshooting
Error messages description
Error code Code description
Drying board
communication
is abnormal
Abnormal
water supply
Abnormal
draining
Abnormal water
heating tube
Abnormal motor
Overflow alarm
Computer
board fault
● Check wiring harness, drying board and computer board.
● Please contact after-sales service department to repair or
replace parts.
● Check whether the water tap for water supply is opened.
● Clean the filter cover of water inlet valve.
● Check the water pressure.
● Contact with the after-sales service department to replace the
computer board or other parts and components.
● Check whether the drain hose is clogged.
● Clean the filter cover of drainage pump.
● Check whether the drain hose is installed correctly.
● Contact with the after-sales service department to replace the
water level sensor or other parts and components.
● Check whether the harness terminal is connected securely or
whether to replace the harness.
● Contact with the after-sales service department to replace the
heating tube or other parts and components.
● Check whether the washing clothes are too many or get stuck;
power off the machine to cool down for a while, and then power on
to start running.
● Check whether the plug wires of motor and inductance are well
alarm
connected and whether any terminal falls off.
● Check whether the belt is worn.
● Contact with the after-sales service department to replace the
motor or other parts and components.
● Check whether the harness terminal is connected securely.
● Contact with the after-sales service department to replace the
water inlet valve or other parts and components.
● Wait for interference disappearing, restart the machine after power
off.
● Contact with the after-sales service department.
Solution
26