Daewoo Daema DWC-1018JD User Manual page 15

Using the Washing Machine
Delay time of 4 hours means the washing programs will come to an end after 4 hours.
Cancellation method: The maximum delay time is 24:00. If select 24:00, press "Delay" button
again and press "Power" button or choose other program to cancel this function.
Note: delay function is not applicable to the clothing easily to produce static electricity. When
using delay function in program with drying function. Because the drying time is determined
according to the loaded clothes, if the delay time is too short, it may not be completed on time.
4
Level
Press "Level" button to select an appropriate water level according to the quantity and type of
clothing.
Set the water level at "0-1-2-3" position by "Level" button. When the water level is at "3"
position, press "Level" button again to cancel the increase of water level. In the process of
setting, the icon on display screen the increase or decrease of water level.
5
Mute
If this icon is on, the device will not output sound.
Setting method: Under the standby or suspended status, press the "water level" and
"dehydration" button for 3 seconds, the mute function will be turned on or turned off.
Spin
6
The speed display area shows the dewatering speed set, press the dehydration button, choose
the appropriate speed according to the washing clothes.Single drain funtion will drain the
water left inside drum when select 0 speed.
7
Child lock
This function can lock the buttons other than "Power" . In this way, the selected washing program
will not be changed due to any misoperation of a child to avoid its failure to run normally.
Setting method of child lock:
During the program running, press "Spin" and "Rinse+" buttons simultaneously and keep for
more than 3 seconds, this function will be selected and child lock indicator light
Note: If the child lock function is turned on, after turning off the power button power then
turning on, the child lock function is still valid. The child lock function needs to be released
before the program can be operated.
8
Rinse+
Select proper rinse times by pressing the button repeatedly.
This function can be set up before program starting. If setting needs to be changed after
starting, pause the program and make proper adjustment prior to rinsing.
14
will be on.