Daewoo Daema DWC-1018JD User Manual page 12

Installing the Washing Machine
Connecting the water supply hose
For models with additional hot water inlet:
Connect the red end of the hot water supply
hose to the hot water inlet on the back of the
washing machine.
Connect the other end of the hot water supply
hose to the hot water faucet.
Positioning the hose drain
Ensure the drain pipe is fixed, and the position does not move or become loose,,
otherwise it will cause leakage and property loss .
The end of the drain hose may be positioned in three ways:
1.Over the edge of a wash basin
The end of the drain hose must be placed at lower
than 90cm from the groud. To avoid the influence of
the drain hose bending on water flow, secure it over
the edge of the wash basin with a hook or a piece of
string to prevent the drain hose from moving.
2.In a floor drain directly:
In order to avoid the syphonage, please ensure the
pipe length over floor drain is less than 90cm.
Suggest to use 65cm vertical pipe. Ensure the pipe
contected with vertical pipe obliquely.The terminal
of pipe must be higher than water level.
Note: the end of the drain hose cannot be immersed
in water.
3.In a sink drain hose branch:
The end of the drain hose is connected to a sink
drain hose branch.
11