Daewoo Daema DWC-1018JD User Manual page 10

Installing the Washing Machine
Removing the shipping bolts
Before using the washing machine, you
must remove all shipping bolts from the
back of the washing machine. To remove
the shipping bolts:
1.Loosen all shipping bolts with the
spanner.
2.Take each bolt head and pull it out
from the loose hole. Repeat the same
process for all shipping bolts.
3.Fill the holes with the supplied bolt
caps.Keep the shipping bolts for
future use.
Adjusting the adjustable feet
If the floor is uneven,adjust the adjustable
feet of the washing machine.Do not insert
pieces of wood or any other objects under
the leg.
1.Turn left to loosen the leg bolt with the
spanner.
Leg nut
2.Adjust the adjustable feet until it is at
the desired
clockwise for higher and turn clockwise
for lower.
Adjust the feet higher
3.Tighten the leg nut with the spanner.
Leg nut
Press the two diagonal corners at the top
of the washing machine with your hands
to check if the washing machine still
shakes.The two diagonals have to be
checked.If the washing machine still
shakes,the leg must be readjusted.
9
Spanner
Adjustable Feet
height,turn counter
Adjust the
feet
lower
Spanner
Adjustable Feet