Tektronix CTS 710 User Manual page 166

Setting SDHSONET Transmit Parameters
If you select User Word 8 bit/16 bit/24 bit for the test pattern, set the
value of the User Word as follows:
1. Set the contents of the User Word Byte(s) as follows (see
Figure 3–27):
Press Menu
Button
2. Select EDIT BYTE/Edit XX bits to specify a value different
from the preset choices.
3. Select Predefined Patterns if you decide to use the standard
patterns.
4. Select DONE when you are finished editing the byte.
www.valuetronics.com 3–76
Select Menu Highlight
Page Parameter
Test Pattern
CTS 710 SONET Test Set User Manual
Select Choice
Set to 00000000
Set to 11111111
Default 10101010
EDIT BYTE/
Edit XX bits