Connecting to the power supply
!
The appliance must only be connected to an A.C. mains supply
via a correctly installed earthed socket.
!
The voltage given on the appliance nameplate must match that
of the power supply where the appliance is installed.
!
The power rating and the fuse or circuit breaker required are
specified on the machine's rating plate.
!
Check that the socket and the plug on the machine are
compatible, that the cables have a sufficient diameter and that
it is earthed correctly.
!
Never use multiple plugs, sockets or connectors or extension
cables.
!
If using a residual current-operated circuit breaker, it must
display the 7 symbol. Only this type of protective switch will
ensure compliance with current regulations.
!
Remove the appliance plug from the socket, holding onto the
body of the plug.
9
en