BALAY 3TS872BE Operating Instructions And Installation page 12

Programme
selector
The programme rotary selector is used to
select and adjust the programmes. Turn the
mark on the rotary selector to the programme
selected.
The maximum programme temperature is set at
60º C for delicates and 40º C for woollens, even if
a higher temperature has been selected, so as to
avoid damaging delicate items.
Washing machine status indicator
lights
«fin» when the wash cycle has finished.
«lavando» when the start button «
pressed.
M
«Press » when you are selecting a
programme.
12 en
and temperature
M
» has been
Function and «Start
buttons
M
- Start
The appliance starts the programme selected
when the button is pressed. The «pulsar
light comes on. Preselect the wash programme.
Caution: For safety reasons the machine will not
start if the door is not properly closed, even if the
M
«pulsar » light is on and the «
pressed.
The door of the washing machine cannot be
opened during the washing cycle. The machine
must first be switched off before the door can be
opened (programme selector on «stop»).Check
that the «fin» light has gone out. The door can be
opened after 2 minutes.
L
- Rinse hold - After rinsing has finished
When this button is pressed, the function
indicator light comes on and the laundry remains
in the last rinsing water to avoid creasing.
/ - Spin
The function indicator light comes on when this
button is pressed. The spin cycle in the wash
programme for hard-wearing white and
coloured items is carried out at a lower speed.
In the delicates and woollens programme, the
spin cycle is automatically carried out with the
least number of spins, regardless of whether this
button has been pressed
I
- Quick
The wash programme completes one less rinse
cycle. The duration of the wash cycle is much
shorter than for the normal programme.
R
- Extra water
When this button is pressed, the water level rises
during the rinse cycles for the white and coloured
hard-wearing fabrics and delicates wash
programmes.
M
» selection
M
»
M
» button