Parts And Controls - Aiwa XR-EM50 Operating Instructions Manual

PARTS AND CONTROLS

Main unit: front
1
2
3
4
1 dTAPE (REC MUTE)
Starts playback and changes the playback side.
Also used to enter 4-second blank spaces during
recording.
TUNER/BAND
Selects Radio function and the radio band.
AUX
Selects the function of external equipment connected to
AUX IN jacks.
ECD
Starts and pauses CD play.
2 POWER 6STANDBY/ON
Switches the unit on and off (standby).
3 wREC/REC PAUSE
Starts and pauses recording.
SYNCHRO REC
Starts recording and CD play simultaneously.
sCLEAR
5
CD and Tape: stops playback.
Radio: clears a preset station.
6
f/r, t/g (TUNING -, +)
7
CD: skips to a previous or a succeeding track when
pressed, searches a track in fast forward or reverse
playback when held down.
Tape: rewinds or fast forwards the tape.
Radio: manually tunes up or down within the band.
4 PHONES jack
Plug in optional headphones set with a stereo mini plug
(ø3.5 mm). Speaker output is canceled.
5 zCD OPEN/CLOSE
Opens or closes the disc compartment.
6 VOLUME
Adjusts the volume etc..
7 ECO
Sets the ECO mode on or off.
DISPLAY
Changes the display in CD playback mode.
TONE
Selects the sound adjusting mode, "BAS" (bass) or
"TRE" (treble).
Main unit: rear
1
2
3
4
5
1 AM LOOP jack and FM 75
Connect the supplied AM and FM antennas.
2 AUX IN jacks
Accept analog sound signals from external equipment.
Connect external equipment using an optional connecting
cable with RCA phono plugs (red plug to R jack, white
plug to L jack). Refer also to the operating instructions
for your equipment.
To switch function to external input, press AUX.
To change a source name in the display of the
AUX function.
Hold down AUX and press POWER while the power is
on.
AUX VIDEO
3 SUB WOOFER3 jack
Connect optional powered sub woofer with a built-in
amplifier to the jack.
4 SPEAKERS3 terminals
Connect the speaker cords of the supplied speakers.
5 AC power cord
En
terminals
TV
5