Tape Playback - Aiwa XR-EM50 Operating Instructions Manual

TAPE PLAYBACK

d
s
En
wREC/
REC PAUSE
SYNCHRO
REC
Playback
Use only type I (normal) tapes.
1 Press zPUSH EJECT to open the cassette holder.
2 Insert the tape.
Insert with the exposed side down, and press zPUSH
EJECT to close the cassette holder.
3 Press d to start play.
12
AUX
f,g
REC/
REC PAUSE
REC MUTE
zPUSH
EJECT
SHIFT
To select a reverse mode
Hold down SHIFT and press REV MODE repeatedly on the
remote control.
The mode changes as follows;
"p" : Plays one side only
"[" : Plays from the front side to the back sides once.
"]" : Plays both sides repeatedly
To stop playback
Press s.
To change the playback side
Press d in playback mode.
To rewind or fast forward
Press f or g.
To reset the tape counter
Press s in stop mode, and the tape counter on the display is
reset to "0000".
Opening and closing the cassette holder will also reset the
tape counter.
To eject the tape
Press z PUSH EJECT after the deck stops completely.
Notes on cassettes
TUNER MODE
•Use of 120-minute or longer tapes is not recommended
since they are extremely thin and easily deformed or
FUNCTION
damaged.
•Wind up any slack in the tape with a pencil or similar tool
REV MODE
before use. Slack tape may jam in the mechanism.
s
d
f,g