Parts And Controls - Aiwa NSX-TRV77 Operating Instructions Manual

PARTS AND CONTROLS

Main unit: rear
1 NTSC/AUTO/PAL switch
Sets the color system of the video signal output via the
VIDEO OUT jack. Turn off the power, and then set the
switch according to your TV set;
- PAL: When connecting to a PAL system TV.
- NTSC: When connecting to an NTSC system TV.
- AUTO: When connecting to a multi color system TV.
•In case of setting the switch to "AUTO", you need to
adjust the color system according to your VCD to
play back. Hold down CD button for about 6 seconds
in stop mode in CD function, and "PAL" (initial) or
"NTSC" appears on the display (except when the
loaded disc is MP3-CD).
When playing back a PAL VCD, hold down CD and
release it when "PAL" appears.
When playing back a NTSC VCD, do the same
procedure and release it when "NTSC" appears.
When the function is changed or the unit is turned
off, PAL is restored.
•This unit does not support color systems other than
PAL and NTSC, such as NTSC 4.43 or SECAM.
•If there is a color or picture trouble in the AUTO mode,
select NTSC or PAL.
2 AC VOLTAGE selector
Switches AC voltage between 220V and 230V-240V.
Make sure it matches your local voltage.
3 VIDEO OUT jack
Outputs video signals. Connect to the video input jack
of your TV set with the supplied video connecting cord.
Select the appropriate video input on your TV. Refer to
the operating instructions of your TV.
4 MW LOOP, SW, FM 75 Ω terminals
Plug in the supplied MW, SW and FM antennas here.
5 VIDEO/AUX jacks
Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your
equipment.
To switch function to external input, press VIDEO/AUX.
Tip:
To change the displayed name for this function, turn
the unit on, then hold down VIDEO/AUX and press
POWER. Repeat the procedure to select "AUX",
"VIDEO" or "TV".
6 SPEAKERS3 terminals
Connect the speaker cord of the supplied front speakers
here.
7 AC power cord
Dynamic Integrated Neo Amplifier
is a brand-new amplifier system where clear mid-to-high
range frequency sound, as well as rich low frequency sound,
can be reproduced and listeners can enjoy the close-to-
original sound with less distortion at either high or low
volume levels.
En
5