Table of Contents
Advertisement
PARTS AND CONTROLS
Main unit
1
2
3
4
5
1 ECO/DIMMER
Selects ECO mode and dimmer mode.
TONE
Adjusts the bass or treble level.
SET
Determines the mode.
Stores the received station to preset.
DISPLAY
Changes the display in CD playback mode.
2 CD window
3 zOPEN/CLOSE
Opens or closes the CD window.
4 POWER 6STANDBY/ON
Switches the unit on and off (standby).
5 PHONES jack
Plug in optional headphones set with a stereo mini plug
(ø3.5 mm). Speaker output is canceled.
6
7
8
9
6 TUNER/AUX / BAND
Selects Radio function, the radio band, and the function
of external equipment connected to AUX IN jacks.
DEMO/PRESET
When the unit is turned off: switches DEMO on and off.
When the unit is turned on: tunes in a preset station.
7 VOLUME -, +
Adjusts the volume.
8 DISC DIRECT PLAY 1-3 / DISC CHANGE
Selects a disc tray.
9 CDE
Starts and pauses play.
sCLEAR
CD: stops playback.
Radio: clears a preset station.
f/r, t/g (TUNING -, +)
CD: skips to a previous or a succeeding track when
pressed, searches a track in fast forward or reverse
playback when held down.
Radio: manually tunes up or down within the band.
0 AM LOOP jack and FM 75 Ω terminal
0
Plug in the supplied AM and FM antennas.
!
! AUX IN jacks
@
Accept analog sound signals from external equipment.
#
Connect external equipment using an optional connecting
cable with RCA phono plugs (red plug to R jack, white
$
plug to L jack). Refer also to the operating instructions
for your equipment.
To switch function to external input, press TUNER/AUX
%
(AUX on the remote control) repeatedly to display "AUX".
To change a source name in the display of the
AUX function
Select AUX function with TUNER/AUX, then hold down
DEMO/PRESET and press POWER while the power is
on.
AUX
@ LINE OUT jacks
Analog sound signals for all functions can be output
through these jacks. Use a cable with RCA phono plugs
to connect audio equipment.
Signals input through the AUX IN jacks are not output
from the LINE OUT jacks.
# SUB WOOFER3 jack
Connect an optional sub woofer with a built-in amplifier
to the jack.
$ SPEAKERS3 terminals
Connect the supplied speaker cords.
% AC power cord
En
VIDEO
TV
5
Advertisement
Table of Contents
