Advertisement
Quick Links
E1
AR E1-MINI
USER MANUAL
PART 2: RECEIVING UNIT
Instructions translated from the original
This manual, including all its parts, and all the instructions contained in it must be read carefully and understood
before each installation, use, maintenance or reparation of the ELCA radio remote control.
OTHER LANGUAGES
https://qrcode.elcaradio.biz/man/d3ab3e2bcf7e63d25d9c34240ee0ff7a
E1_MINI_P2-01_EN
0408MA000169
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ELCA AR E1-MINI
Summary of Contents for ELCA AR E1-MINI
- Page 1 Instructions translated from the original This manual, including all its parts, and all the instructions contained in it must be read carefully and understood before each installation, use, maintenance or reparation of the ELCA radio remote control. OTHER LANGUAGES https://qrcode.elcaradio.biz/man/d3ab3e2bcf7e63d25d9c34240ee0ff7a...
- Page 3 DEATH AND/OR DAMAGE TO PROPERTY. For further assistance AND UNDERSTOOD BEFORE EACH INSTALLATION, USE, refer to this Manual and all its parts, or else contact Elca. Elca MAINTENANCE OR REPARATION OPERATION OF THE ELCA is not responsible for and accepts no liability for any RADIO REMOTE CONTROL.
- Page 4 INDEX 1 Use and Maintenance Manual ............5 1.1 Structure .................. 5 1.2 Definitions ................5 1.3 Symbols .................. 5 1.4 Who these instructions are for ..........5 1.5 Storage of the instructions ............5 1.6 Updating the Manual ..............6 1.7 Intellectual property..............
- Page 5 The Instruction manual for use and maintenance is an integral part property. of the Elca Radio Remote Control and therefore of the Machine that is equipped with the Radio Remote Control. It is the responsibility of the Manufacturer of the Machine or the system on which the 1.4 Who these instructions are for...
- Page 6 The serial number (Serial Num) can be found on the Unit's data plate (see paragraph 11.3 ). The part of the Manual concerns the Receiving Unit of an Elca Radio Remote Control in the E1 series. 6 Warranty Elca Radio Remote Controls provide a control interface to e used on Machines to manage the command and control system.
- Page 7 • CAN BE OPERATED SAFELY AND IN COMPLIANCE WITH ALL • technical assistance for the Elca Radio Remote Control carried LEGAL PROVISIONS, REGULATIONS AND STANDARDS out by a company other than Elca or that is not part of its APPLICABLE TO THIS RADIO REMOTE CONTROL. assistance network.
- Page 8 7.3 Delay in the command response time 8.1 Characteristics An Elca Radio Remote Control of the E1 series belongs to a family of industrial Radio Remote Controls, that can mainly be used, but not In normal conditions, the delay between the activation of a only, for controlling lifting and transportation apparatus.
- Page 9 PROVIDED IN THIS MANUAL, THE INSTRUCTIONS AND since removing it will immediately void the warranty. WARNINGS IN THE MANUAL OF THE MACHINE AND IN If the data plate has been altered or damaged, contact Elca for COMPLIANCE WITH ALL APPLICABLE LAWS, REGULATIONS a replacement.
- Page 10 8.6 Applications 8.7 Training of the personnel: Installation and maintenance An Elca Radio Remote Control of the E1 range can be used for All the installation and maintenance operations on the Elca Radio various applications: the suitability of the Radio Remote Control for Remote Control should be carried out ONLY by qualified personnel.
- Page 11 Manual of the Radio Remote Control; Unit. • use the Elca Radio Remote Control only as indicated in this • provide for the possible disconnection of the power supply to the Manual and in all the instructions provided by Elca;...
- Page 12 Machine and also the movement of the load; • use the Machine on which the Elca Radio Remote Control is installed only in safe conditions and only if it is possible to get a • get in a safe position with respect to the load, the Machine good view of the working area of the Machine;...
- Page 13 10.5 Warnings during normal use Rating plate Serial number During normal use the User should: • pay attention to the work area and any dangerous situations Cable gland or plug present; Power supply protection fuse (F1) • visually check all the movements of the Machine and the load;...
- Page 14 11.3 Receiving unit data plate The positions of DIP switch 1 and DIP switch 2 should not be There is just one Data plate on the Receiving Unit AR E1-MINI. Its modified for any reason during normal use. position and the information contained in it can be found in the...
- Page 15 Manufacturer of the Machine or by the Installer, whenever it is • use the Machine on which the Elca Radio Remote Control is necessary. installed only in safe conditions and only if it is possible to get a good view of the working area of the Machine;...
- Page 16 Elca Transmitting Unit used, in order to avoid possible radio disturbance and interference; • move the Elca Transmitting Unit closer to the corresponding Elca Receiving Unit, in order to avoid possible radio disturbance and interference, positioning it always in a safe place with a complete view of the Machine, the work area and the load, if present;...
- Page 17 16 Decommissioning and disposal 16.1 Decommissioning After its decommissioning the Radio Remote Control should be transported and kept in accordance to what is in paragraph 8.5 . 16.2 Disposal If disposing of all the parts of the Transmitting Unit and its charging system, they all should be treated as separated waste.
Need help?
Do you have a question about the AR E1-MINI and is the answer not in the manual?
Questions and answers