Table of Contents
Advertisement
Quick Links
E2
AR E29-MINI
USER MANUAL
PART 2: RECEIVING UNIT
Instructions translated from the original
This manual, including all its parts, and all the instructions contained in it must be read carefully and understood
before each installation, use, maintenance or reparation of the ELCA radio remote control.
OTHER LANGUAGES
https://qrcode.elcaradio.biz/man/b0a9df32cb73511c89169ab56470df52
E29_MINI_P2-00_EN
0408MA000292
Advertisement
Table of Contents
Related Manuals for ELCA E2 AR E29-MINI
Summary of Contents for ELCA E2 AR E29-MINI
- Page 1 Instructions translated from the original This manual, including all its parts, and all the instructions contained in it must be read carefully and understood before each installation, use, maintenance or reparation of the ELCA radio remote control. OTHER LANGUAGES https://qrcode.elcaradio.biz/man/b0a9df32cb73511c89169ab56470df52...
- Page 3 DEATH AND/OR DAMAGE TO PROPERTY. For further assistance AND UNDERSTOOD BEFORE EACH INSTALLATION, USE, refer to this Manual and all its parts, or else contact Elca. Elca MAINTENANCE OR REPARATION OF THE ELCA RADIO REMOTE is not responsible for and accepts no liability for any CONTROL.
-
Page 4: Table Of Contents
INDEX 1 Use and Maintenance Manual ............5 1.1 Structure .................. 5 1.2 Definitions ................5 1.3 Symbols .................. 5 1.4 Who these instructions are for ..........5 1.5 Storage of the instructions ............5 1.6 Updating the Manual ..............5 1.7 Intellectual property.............. -
Page 5: Use And Maintenance Manual
The Instruction manual for use and maintenance is an integral part of the Elca Radio Remote Control and therefore of the Machine that is equipped with the Radio Remote Control. It is the responsibility 1.4 Who these instructions are for... -
Page 6: Intellectual Property
2 Series, Radio Remote Control and Unit 3.2 Countries of use The part of the Manual concerns the Receiving Unit of an Elca Radio E2 series' radio remote controls working in the frequency band Remote Control in the E2 series. -
Page 7: Risk Analysis For Remote-Controlled Machines
PRODUCT AND IS EXCLUSIVELY A COMPONENT OF A MACHINE • technical assistance for the Elca Radio Remote Control carried THAT: out by a company other than Elca or that is not part of its • PERMITS A RADIO REMOTE CONTROL TO BE USED IN AN assistance network. -
Page 8: Delay In The Command Response Time
7.3 Delay in the command response time 8.1 Characteristics An Elca Radio Remote Control of the E2 series belongs to a family of industrial Radio Remote Controls, that can mainly be used, but not In normal conditions, the delay between the activation of a only, for controlling lifting and transportation apparatus. -
Page 9: Technical Data Of The Range
PROVIDED IN THIS MANUAL, THE INSTRUCTIONS AND since removing it will immediately void the warranty. WARNINGS IN THE MANUAL OF THE MACHINE AND IN If the data plate has been altered or damaged, contact Elca for COMPLIANCE WITH ALL APPLICABLE LAWS, REGULATIONS a replacement. -
Page 10: Applications
8.6 Applications 8.7 Training of the personnel: Installation and maintenance An Elca Radio Remote Control of the E2 range can be used for All the installation and maintenance operations on the Elca Radio various applications: the suitability of the Radio Remote Control for Remote Control should be carried out ONLY by qualified personnel. -
Page 11: Warnings For The Installer
Manual of the Radio Remote Control; Unit. • use the Elca Radio Remote Control only as indicated in this • provide for the possible disconnection of the power supply to the Manual and in all the instructions provided by Elca;... -
Page 12: Instructions For The User
Machine and also the movement of the load; • use the Machine on which the Elca Radio Remote Control is installed only in safe conditions and only if it is possible to get a • get in a safe position with respect to the load, the Machine good view of the working area of the Machine;... -
Page 13: Warnings During Normal Use
10.5 Warnings during normal use Rating plate Serial number During normal use the User should: • pay attention to the work area and any dangerous situations Cable gland or plug present; Power supply protection fuse (F1) • visually check all the movements of the Machine and the load;... -
Page 14: The Position Of The Controls And Connection Diagram
11.2 The Position of the controls and Connection diagram 12.1 Mother Board The documentation supplied with the Radio Remote Control Contains the STOP, SAFETY and command relays, the terminals for consists of: the electrical connection, the power supply stage and the support •... -
Page 15: Testing
Manufacturer of the Machine or by the Installer, whenever it is • use the Machine on which the Elca Radio Remote Control is necessary. installed only in safe conditions and only if it is possible to get a good view of the working area of the Machine;... -
Page 16: Special Maintenance
Elca Transmitting Unit used, in order to avoid possible radio disturbance and interference; 16.1 Decommissioning • move the Elca Transmitting Unit closer to the corresponding Elca After its decommissioning the Radio Remote Control should be Receiving Unit, in order to avoid possible radio disturbance and transported and kept in accordance to what is in paragraph 8.5 .
Need help?
Do you have a question about the E2 AR E29-MINI and is the answer not in the manual?
Questions and answers