URBAN OUTFITTERS Silas Side Table Assembly Instructions

Silas Side Table
Assembly Instructions
NO ADDITIONAL TOOLS REQUIRED
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Ensure all parts are present prior to assembly.
Contact customer service immediately if parts are missing.
Assemble all parts on a clean smooth surface.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills with a clean white cloth, do not rub.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
1) Table Top
(14 x 14 x 0.7") x 1
or
(35.6 x 35.6 x 1.8 cm)
A) Bolt
(D 0.47 / 0.24 x 1.18") x 4
or
(D 12 x 30 mm)
D) Bolt
(D 0.47 / 0.24 x 0.59") x 8
or
(D 12 / 6 x 15 mm)
09.12.2024
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO,
Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
2) Table Base
(12 x 12 x 0.7") x 1
or
(30.5 x 30.5 x 1.8 cm)
B) Spring Washer
(D 0.47 / 0.24 x 0.08") x 4
or
(D 12 / 6 x 2 mm)
E) Allen Key
(D 0.16 x 2.32") x 1
or
(D 4 x 59 mm)
3) Leg
(18.5 x 12 x 0.7") x 2
or
(46.9 x 30.5 x 1.8 cm)
C) Flat Washer
(D 0.63 / 0.24 x 0.08") x 4
or
(D 16 / 6 x 2 mm)
F) Metal Plate
(5 x 5 x 0.08") x 1
or
(127 x 127 x 2 mm)
Page 1 of 2