URBAN OUTFITTERS EZRA Assembly Instructions

Dining table

EZRA DINING TABLE

Assembly Instructions

TOOLS REQUIRED BUT NOT INCLUDED:

N/A

Do not throw away packing materials and carton until after

assembly. Assemble all parts on a clean smooth surface

Avoid direct exposure to sunlight. Do not place overheat or air

conditioning vents. Adjust levelers so that the furniture sits flat on

uneven floors.

Blot spills do not rub, with a clean white cloth.

Do not use harsh chemicals.

Before cleaning any part test a small spot in a hidden area.

You may need to re-tighten all bolts after initial use.

(A) Glass Table Top

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.

rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be

prosecuted.

(B) Leg

Page 1 of 2

Table of Contents

Do you have a question about the EZRA and is the answer not in the manual?

Page 1 (A) Glass Table Top (B) Leg (C) Side Panel EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent Page 1 of 2 rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be...
Page 2 STEP 2 Align the Side Panels (C) to the Legs (B) and slide them into place as shown. EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent Page 2 of 3 rights.
Page 3 (parts saved from step 1) through the Glass Table Top (A) as shown and re-attach the caps by screwing them clockwise onto the Legs (B). Once caps are secured, the assembly is complete. EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent Page 3 of 3 rights.