URBAN OUTFITTERS NYLA Assembly Instructions

NYLA SHELF
Assembly Instructions

TOOLS REQUIRED BUT NOT INCLUDED:

Phillips Head Screw Driver
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface

CARE INSTRUCTIONS:

Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.

PARTS INCLUDED

(A) Side frame
Quantity: 2pc

HARDWARE LIST

(1) Large allen bolt
M6 x 65mm
Quantity: 16pcs
(5) Allen key
Quantity: 1pcs
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
(B) Front Support
Quantity: 4pc
(2) Small allen bolt
M6 x 25mm
Quantity: 22pcs
(C) Back support
Quantity: 2pc
(3) Cross nut
Quantity: 16pcs
(D) Shelf
Quantity: 4pc
(4) Dowel
M8 x 30mm
Quantity: 12pcs
Page 1 of 3