URBAN OUTFITTERS Amelia Bed Assembly Instructions

Amelia Bed
Assembly Instructions
TOOLS REQUIRED BUT NOT INCUDED: N/A

WARNINGS:

Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface.
Do not drag the bed while moving, lift with help.
Do not over tighten bolts.

CARE INSTRUCTIONS:

Avoid direct exposure to sunlight.
Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.

PARTS INCLUDED:

(1) Side Rails x2
(4) Center Legs x3
(A) Allen Bolt
[8x50mm] x4
(D) Washer
[8.5 mm] x15
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO, Inc.
All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
(2) Head/Foot Boards x2
(B) Allen Bolt
[8x60mm] x3
(E) Allen Key
x1
URBAN OUTFITTERS
(3) Mid Rail x1
(5) Slats x2
(C) Allen Bolt
(F) Spring Washer
[8x25mm] x8
[8.5 mm] x7
Page 1 of 4