URBAN OUTFITTERS TABITHA Assembly Instructions

TABITHA DESK

Assembly Instructions

TOOLS REQUIRED BUT NOT INCLUDED:

Phillips head screwdriver

Do not throw away packing materials and carton until after

assembly. Assemble all parts on a clean smooth surface

Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.

Adjust levelers so that the furniture sits flat on uneven floors.

Blot spills do not rub, with a clean white cloth. Do not use harsh chemicals. Before

cleaning any part test a small spot in a hidden area. You may need to re-tighten all

bolts after initial use.

TIP KIT

(G) Nylon strip

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.

rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be

prosecuted.

(D) Bolt

[1/4" x 7/8"] x12

(H) Bracket

(E) Spring washer

[1/4"] x12

(I) Screw

[M3 x 32mm] x2

(F) Flat washer

[1/4"] x12

(J) Screw

[M3 x 19mm] x2

Page 1 of 3

Table of Contents

Do you have a question about the TABITHA and is the answer not in the manual?

Page 1 (J) Screw [M3 x 32mm] x2 [M3 x 19mm] x2 EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent Page 1 of 3 rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be...
Page 2 Drawer front and insert the original Machine Screw to secure with a Phillips Head Screwdriver. Do not over tighten. EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Page 3 Slide the case to the wall. Leaving a little bit of room between the case and the wall. Feed the Nylon Strap through both brackets and pull tight. EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.