URBAN OUTFITTERS SILAS Assembly Instructions

SILAS WALL SINGLE SHELF
Assembly Instructions
TOOLS REQUIRED BUT NOT INCUDED:
Screwdriver, Drill, Hammer
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface.
Shelf is rated to hold up to 28 lbs.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place overheat or air
conditioning vents. Adjust levelers so that the furniture sits flat on
uneven floors. Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
1) Top Panel
(16 x 7.5 x 0.7") x 1
40.6 x 19 x 1.8 cm
A) Bolt
(D 0.47 / 0.24 x 0.59") x 4
(D 12 / 6 x 15 mm)
C) Plastic Anchor
(D 0.35 x 1.38") x 2
(D 9 x 35 mm)
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO, Inc.
All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized
reproduction, adaptation, distribution or other infringement will be prosecuted.
or
or
or
2) Leg
(4.6 x 28 x 1.5") x 2
or
11.7 x 7.2 x 3.8 cm
B) Allen Key
(D 0.16 x 2.32") x 1
or
(D 4 x 59 mm)
D) Screw
(D 0.16 x 1.18") x 2
or
(D 4 x 30 mm)
Page 1 of 2