Page 2
Table of Contents HighPoint RocketU 1322B introduction ........2 Kit Contents ................. 2 Board Layout................3 Installing the RocketU Series Host Adapter ......... 4 Driver Installation ................ 4 Verifying Installation (Windows) ..........5 Verifying Installation (Mac OS X) ..........5 Connecting USB Storage Devices ..........
Page 3
HighPoint RocketU 1322B introduction The RocketU 1322B is a 2-Channel USB 3.1 10Gb/s PCIe 3.0 x4 host adapter with both USB Type-C and Type-A ports. The RocketU 1322B can be easily installed into any PCIe x4, x8 or x16 slot, and is natively supported by the latest versions of Windows, Mac OS, and Linux distributions.
Page 5
5. Close and secure the system chassis. Driver Installation Windows Platforms: The RocketU 1322B is natively supported by Windows 8 and later (no driver installation is required). Mac OS: The RocketU 1322B is natively supported by Mac OS 10.10 and later (no driver installation is required).
Page 6
Host Controller. Connecting USB Storage Devices 1. Power on the system. 2. Connect the USB device to the HighPoint RocketU HBA with a USB cable. 3. For hard drives or enclosures, allow the device to spin up for a few moments.
Page 7
FCC Part 15 Class B Radio Frequency Interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the RocketU 1322B and is the answer not in the manual?
Questions and answers