Mayr EAS-Sm Installation And Operating Instructions Manual

Installation and Operating Instructions for
® ®
EAS -Sm / EAS
Please read the Operational Instructions carefully and follow them accordingly!
Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts.
Contents:
Page 1: - Contents
- Manufacturer's Declaration
- Safety Guidelines
Page 2: - Clutch Illustrations
- Parts List
Page 3: - Table 1: Technical Data, General
- Table 2: Technical Data for mounted
®
ROBA -D coupling on Type 436.03_._
- Safety and Guideline Signs
- Design
- State of Delivery
- Function
Manufacturer's Declaration
This product is intended for installation in a machine or system, based on the machine directive 98/37/EC.
It is forbidden to start use of the product until the machine or system into which it should be built is operating in accordance with the EC
directives.
Safety Regulations
These Installation and Operational Instructions (I + O) are part of the clutch delivery.
Please keep them handy and near to the clutch at all times.
Danger!
This warning applies if:
the EAS
the relevant standards for safety and / or installation conditions are ignored.
User-implemented Protective Measures
Cover all moving parts to protect against seizure, dust or foreign body impact.
The clutch may not be put into operation without a limit switch unless mayr
otherwise.
To prevent injury or damage, only professionals and specialists should work on the devices, following the
relevant standards and directives. Please read the Installation and Operational Instructions carefully before
installation and initial operation of the device.
Warning:
Without a conformity inspection, this product is not suitable for areas where there is a high danger of explosion. This statement is based on
directive 94/9 EC (ATEX directive).
Please Observe:
According to German notation, decimal points in this document are represented with a comma (e.g. 0,5 instead of 0.5).
22/03/2007 TK/RN/RJ
Page 1 of 6
-Zr Clutch and Type 4_ _.03_._ Sizes 0 – 4
®
-clutches are modified.
These Safety Regulations are user hints only and may not be complete!
Chr. Mayr GmbH + Co. KG
Eichenstraße 1
D-87665 Mauerstetten
Germany
Page 4: - General Installation Guidelines
- Clutch Installation
- Friction Support Installation
- Torque Adjustment
Page 5: - Limit Switch Installation
- Electrical Connection
Page 6: - Maintenance
- Disposal
- Malfunctions / Breakdowns
®
has been contacted and has agreed
Tel.: 08341 / 804-0
Fax: 08341 / 804-421
http://www.mayr.de
eMail: info@mayr.de
(B.4.9.GB)