Mayr EAS-Compact-R Installation And Operation Instructions Manual

Installation and Operational Instructions for
® ®
EAS -Compact
rustproof synchronous clutch Type 49A. _ _5._ Sizes 0 – 3
Please read these Operational Instructions carefully and follow them accordingly!
Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts.
Contents:
Page 1: - Contents
- Safety and Guideline Signs
- Safety Regulations
Page 2: - Clutch Illustration
- Parts List
Page 3: - Technical Data
Page 4: - Design
- State of Delivery
- Function
- Installation of the Output Elements
Page 5: - Mounting onto the Shaft
- De-installation
- Shaft Installation via Key Connection
- Cup Spring Layering
- Torque Adjustment
Page 6: - Torque Adjustment on Type 49A._ _5.0
Page 7: - Torque Adjustment on Type 49A._ _5.C
Page 8: - Limit Switch Installation
- Maintenance
- Disposal
Page 9: - Malfunctions / Breakdowns
Safety Regulations
These Installation and Operational Instructions (I + O) are part of the clutch delivery.
Please keep them handy and near to the clutch at all times.
It is forbidden to start use of the product until you have ensured that all applicable EU directives and directives for the
machine or system into which the product has been installed have been fulfilled.
At the time these Installation and Operational Instructions go to print, the EAS
specifications and are operationally safe at the time of delivery.
Without a conformity evaluation, this product is not suitable for use in areas where there is a high danger of explosion.
This statement is based on the ATEX directive.
CAUTION
If the EAS
If the relevant standards for safety and / or installation conditions are ignored.
User-implemented Protective Measures
Cover all moving parts to protect against seizure, dust or foreign body impact.
The clutch may not be put into operation without a limit switch unless mayr
otherwise.
To prevent injury or damage, only professionals and specialists should work on the devices, following the
relevant standards and directives. Please read the Installation and Operational Instructions carefully before
installation and initial operation of the device.
07/03/2011 TK/GH/GF/SU
Page 1 of 9
®
-R, EAS -Compact
®
-clutches are modified.
These Safety Regulations are user hints only and may not be complete!
®
-RA
Safety and Guideline Signs
CAUTION
Chr. Mayr GmbH + Co. KG
Eichenstraße 1
D-87665 Mauerstetten
Germany
(B.4.14.5.GB)
Danger of injury to personnel and
damage to machines.
Please Observe!
Guidelines on important points.
According to German notation, decimal points
in this document are represented with a
comma (e.g. 0,5 instead of 0.5).
®
-clutches accord with the known technical
®
has been contacted and has agreed
Tel.: 08341 / 804-0
Fax: 08341 / 804-421
http://www.mayr.de
E-mail: info@mayr.de