CHCNAV CHC i83 User Manual page 17

displays
returns to the Status Menu from the Main Menu.
Compatible Field Software
LandStar8
The preferred field software for the i83 receiver is LandStar8. LandStar8 runs on most Android devices, is reasonably
priced and has native support for all i83 functions. Full LandStar8 demos are available. Read this FAQ for step-by-step
instructions:
Other Field Software Tools
The following field software tools are compatible with the i83 receiver:
CHCNav LandStar7:
GeoMax X-PAD Ultimate:
MicroSurvey Field Genius:
Carlson SurvCE version 5.09 through 6.08:
Carlson SurvPC version 6.07 through 6.08:
Note: Carlson has dropped support for all CHC receivers from all versions of SurvCE and SuvPC higher than 6.08. If you
absolutely must use SurvCE or SurvPC, please read these detailed instructions:
Cancel: select and click
click to reset all setting to the Factory
Defaults. This takes 15-seconds, then the
receiver will reboot.
click to toggle between
Fi. 2.4 G is the default value.
click to toggle through the available
languages:
EN English, RU Russian, FR
Portuguese, JP Japanese,
click to return to the Main Menu.
fully compatible
fully compatible
fully compatible
compatible without IMU Tilt Enabled
compatible with IMU Tilt Enabled
17
to abandon changes.
2.4 G and 5.8 G Wi-
French, SP Spanish, PT
CH Chinese
CHC i83 User Manual
Click to move to
the Wi-Fi setting.
Click to move to
the Language setting.
Click to move to
the Return icon.
Click to move to
the Reset menu.