Microscan Vision HAWK GMV-6800-1016G Manual page 94

Appendix E
Serial Commands
INFO [tagname|service]
Gets information about a tag or service.
INFO with no arguments gets a list of services.
INFO <service> gets a list of tags in that service.
INFO <service.tagname> gets attributes of the tag as well as a list of subtags.
The AVP service allows retrieval of step and datum information from the job tree using
forward slash '/' in the symbolic name path. INFO avp/insp1/snapshot1/status paths
are not case-sensitive and do not need to be fully qualified if unique.
INFO avp/snapshot1/status will return the same result if there is only one inspection.
When issued against a step, INFO avp/snapshot1 returns properties of the step, a list of
child datums, and a list of child steps. Child steps are indicated by a trailing forward slash.
QUERYAUTOCAL
Returns photometry settings: Gain, Exposure, and Focus.
AUTOCAL
Performs automatic calibration of photometry settings: Gain, Exposure, and Focus.
TARGET {0|1|off|on}
Turns targeting LEDs On or Off.
target 1 = Turn Target On
target 0 = Turn Target Off
CHECKSUM {BOOT | KERNEL | BOOTPARAM}
Gets a checksum on an individual part of the system.
HELP
Returns a list of all serial commands showing correct syntax and functionality descriptions.
E-6 Vision HAWK Smart Camera Guide