Richmar HydraTherm Deluxe Instruction Manual

HydraTherm Deluxe
CLEANING INSTRUCTIONS GUIDE
Thank you for purchasing the HydraTherm Deluxe. This Cleaning Instructions Guide will help you to
get started quickly, but does not replace the Operating Manual. Be sure to read, understand, and
practice the operating instructions, warnings, and cautions included in the manual.
Keep this instruction sheet as a quick-reference
guide for cleaning your HydraTherm Deluxe. It is
recommended to clean your unit a minimum of
two times per year. The low water sensor may be
wiped off more frequently to ensure cleanliness
and proper function. Let water cool before wiping
off sensor.
APPROVED CLEANING AGENTS:
When cleaning your HydraTherm Deluxe, please
use a non-abrasive, low-to-no chlorine cleaner, such
as a bleach-free multi-purpose cleaner. Certain
additives such as herbal teas, essential oils, etc. that
are added to cleaning solutions may damage the
components of this heating device.
REMOVING HYDRAHEAT PACKS:
During extended periods of non-use, or when
cleaning your device, lay HydraHeat Packs flat to
maintain even distribution of gel inside the packs.
This will make it easier to reintroduce packs
back into the tank. Do not store in areas with a
temperature below 35°F/2°C.
CLEANING PREPARATION:
Turn the unit to the OFF position. Unplug
the device. Let the water cool down to room
temperature. Move HydraTherm Deluxe to a
location where it may be drained.
To use the electric drain pump, you must plug it
•
into a properly grounded GFCI outlet to drain the
water into a wastewater receptacle such as
a sink, toilet, or floor drain
GATHER THE ITEMS NEEDED TO
CLEAN THE HYDRATHERM DELUXE
Cleaning solution made of any non-abrasive,
•
bleach free, low to zero chlorine cleaner.
Cleaning sponge with non-abrasive surface
•
to clean packs, device, and remove debris
where needed.
CLEANING STEPS ON BACK