Cochlear Mini Microphone 2+ Pairing And Connecting page 4

Pairing the Mini Microphone 2+
to the Kanso 2 Sound Processor
Turn on your Mini Mic 2+
1 1
The Mini Mic 2+ power button is located
on the top of the device. Hold this button
for two seconds. You will see a green light.
Press the pairing button
1 3
on the Mini Mic 2+
Use a pen to press the white pairing
button. The Mini Mic 2+ will ash yellow
for 20 seconds when it is in pairing mode.
Note: You may pair up to three accessories. Press
the button one time for the rst accessory, two
times for the second, and three times for the third.
Look for the blue light on your sound processor
1 5
Your sound processor will ash blue when successfully paired!
If you do not see the blue light, attempt steps 2–4 again, turning
the device(s) on more quickly after pressing the pairing button.
For help, call Device Support at 800 483 3123, then select option 2.
Turn o your sound processor
2
Plug the charger into the wall. Place your
sound processor in the charger and
close the lid. close the lid.
Note: If you wear a Cochlear device on the other
ear, turn it o now.
Turn on your sound processor
4 1 4
Within 20 seconds of pressing the pairing
button, remove your sound processor from
the charger. the charger.
Note: If you wear a Cochlear device on the other
ear, turn it on now.