Please seek advice from your health professional about treatments for hearing loss. Outcomes may vary, and your health professional will advise you about the factors which could
a ect your outcome. Always read the instructions for use. Not all products are available in all countries. Please contact your local Cochlear representative for product information.
©Cochlear Limited 2023. All rights reserved. ACE, Advance O -Stylet, AOS, Ardium, AutoNRT, Autosensitivity, Baha, Baha SoftWear, BCDrive, Beam, Bring Back the Beat,
Button, Carina, Cochlear, 科利耳, コクレア , 코클리어, Cochlear SoftWear, Contour, コントゥア , Contour Advance, Custom Sound, DermaLock, Freedom, Hear now. And
always, Hug t, Human Design, Hybrid, Invisible Hearing, Kanso, LowPro, MET, MP3000, myCochlear, mySmartSound, NRT, Nucleus, Osia, Outcome Focused Fitting, O -
Stylet, Piezo Power, Pro le, Slimline, SmartSound, Softip, SoundArc, True Wireless, the elliptical logo, Vista x, Whisper, WindShield and Xidium
are either trademarks or registered trademarks of the Cochlear group of companies.
www.cochlear.com/us
FUN5164 ISS1 OCT23
Follow us on
Need help?
Do you have a question about the Mini Microphone 2+ and is the answer not in the manual?
Questions and answers
How do I delete a second pairing for the mini mic? It's on both channel 1 and channel 3. My TV streamer is on channel 1.
To delete a second pairing for the Cochlear Mini Microphone 2+ on channel 3, follow these steps:
1. Turn off your Cochlear sound processor.
2. Turn on the Mini Microphone 2+.
3. Press the pairing button three times using the tip of a pen or similar object. The status LED will flash yellow three times per sequence, indicating channel 3 pairing mode.
4. While pairing mode is active, turn on your sound processor.
5. The sound processor should indicate successful pairing with an audible melody or flashing light.
Since the microphone supports up to three accessory pairings, re-pairing a new device on channel 3 will replace the existing pairing.
This answer is automatically generated