Advertisement
Pairing the TV Streamer to the Kanso 2 Sound Processor
and ReSound Hearing Aid
Turn on your TV Streamer
1 1
Plug the TV Streamer into the wall for
power. You will see a green light on the
front of the TV Streamer.
Press the pairing button
1 3
on the TV Streamer
The TV Streamer will ash yellow for
20 seconds when it is in pairing mode.
Note: You may pair up to three accessories. Press
the button one time for the rst accessory, two
times for the second, and three times for the third.
Look for the blue light on your sound processor
1 5
Your sound processor will ash blue when successfully paired!
Use either the RCA or digital optical cable to connect to your TV
1 6
For help, call Device Support at 800 483 3123, then select option 2.
Turn o both hearing devices
2
Plug the charger into the wall. Place your
sound processor in the charger and
close the lid.
close the lid.
Place your hearing aid in its charger
open the hearing aid battery door.
—OR—
Turn on both hearing devices
4 1 4
Within 20 seconds of pressing
the pairing button:
First, remove your hearing aid from its
charger
close the hearing aid
—OR—
battery door.
Then, remove your
sound processor
from the charger.
Advertisement
Need help?
Do you have a question about the Mini Microphone 2+ and is the answer not in the manual?
Questions and answers
How do I delete a second pairing for the mini mic? It's on both channel 1 and channel 3. My TV streamer is on channel 1.
To delete a second pairing for the Cochlear Mini Microphone 2+ on channel 3, follow these steps:
1. Turn off your Cochlear sound processor.
2. Turn on the Mini Microphone 2+.
3. Press the pairing button three times using the tip of a pen or similar object. The status LED will flash yellow three times per sequence, indicating channel 3 pairing mode.
4. While pairing mode is active, turn on your sound processor.
5. The sound processor should indicate successful pairing with an audible melody or flashing light.
Since the microphone supports up to three accessory pairings, re-pairing a new device on channel 3 will replace the existing pairing.
This answer is automatically generated