Cochlear Mini Microphone 2+ Pairing And Connecting

Pairing the Mini Microphone 2+
to the Nucleus 8 Sound Processor
Turn on your Mini Mic 2+
1 1
The Mini Mic 2+ power button is located
on top of the device. Hold this button for
two seconds. You will see a green light.
Press the pairing button
1 3
on the Mini Mic 2+
Use a pen to press the white pairing
button. The Mini Mic 2+ will ash yellow
for 20 seconds when it is in pairing mode.
Note: You may pair up to 3 accessories. Press the
button one time for the rst accessory, two times
for the second accessory, and three times for the
third accessory.
Look for the blue light on your sound processor
1 5
Your sound processor will ash blue when successfully paired!
If you do not see the blue light, attempt steps 2–4 again, turning
the device(s) on more quickly after pressing the pairing button.
For help, call Device Support at 800 483 3123, then select option 2.
Turn o your sound processor
2
Hold the button
—OR—
for 5 seconds
The light on top will turn o when the
sound processor is o .
Note: If you wear a Cochlear device on the other
ear, turn it o now.
Turn on your sound processor
4 1 4
Within 20 seconds of pressing
the pairing button:
Press the
—OR—
button one time
Note: If you wear a Cochlear device on the other
ear, turn it on now.
2
1
Remove the
battery
3
4
Attach the
battery