Page 1
Box Contents OpenEye C2214B4 cameras come with self-tapping screws and plastic anchors, mounting template, and a waterproof cable connector. Identify the following components to make sure everything has been properly included with your new recorder. If any of the following items are missing, contact the dealer to arrange a replacement.
Page 2
Sourcing Equipment (PSE) switch is available. Ensure that the camera’s power cable is correctly and firmly connected. NOTE: OpenEye recommends against using more than one power source at a time. Do not use a PoE power source when providing the camera with 12vDC power.
Page 3
Assigning an IP Address OpenEye IP cameras are set to DHCP by default. If a DHCP server is not detected after 2 minutes, the camera will default to IP address 192.168.51.2. If you are not using a DHCP server, NCM will allow you to batch configure a static IP address.
Page 4
Pan: 0° ~ 360° Pan/Tilt/Rotate Tilt: 0° ~ 90° Rotate: 0° ~ 360° IP Rating IP67 Related Links Network Camera Manager Advanced Camera Management Adding Cameras and Camera Settings OE-C2214B4 https://answers.openeye.net/Install/Hardware_and_OS/Cameras/OpenEye_Cameras/OE-C2214B4/OE-C2214B4_Quick_Star… Updated: Mon, 13 Jan 2025 20:24:23 GMT Powered by...
Need help?
Do you have a question about the OE-C2214B4 and is the answer not in the manual?
Questions and answers