Related Manuals for Anmytek Mid Century Floating Side Table H0070
Summary of Contents for Anmytek Mid Century Floating Side Table H0070
- Page 1 Contact Us: service@anmytek.com H0070 Mid Century Floating Side Table 1 x 1 m 45 MIN 1 PEOPLE...
-
Page 2: Safety Precautions
Contact Us: service@anmytek.com SAFETY PRECAUTIONS PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND USING THE PRODUCT. Please check that all parts are present before you start the assembly of your furniture. A Philips head screwdriver (not included) is required for the assembled of thisproduct. -
Page 3: Assembly Diagram
Contact Us: service@anmytek.com ASSEMBLY DIAGRAM ⑨ ⑩ ⑭ ⑩ ⑥ ⑧ ⑦ ⑪ ⑫ ⑬ ⑬ ⑫ ② ④ ⑤ ① ③ AFTER SALES SUPPORT If you have any general enquiries or require spare parts for this product, please feel free to contact us via the following email: Email: service@anmytek.com... - Page 4 Contact Us: service@anmytek.com Ax14 Bx14 Cx10 4x30mm 4x45mm 3.5x12mm 6x50mm 6x35mm 3x16mm 4x10mm 4x35mm 6x25mm...
-
Page 5: What You Need
For more help, you can send a message to our customer support email service@anmytek.com in any time. Ready? Ok, let’s get rolling! This should be very easy, just follow our simple instructions step by step and you will put it together in no time. -
Page 6: Assembly Steps
ASSEMBLY STEPS STEP 1. ③ ④ ② ③ ② ⑤ Attach panels (2), (3) to panel (4) using 4 x screws (D) with a screwdriver. Slide panel (5) into position. STEP 2. ③ ② ① Attach panel (1) to assembled unit using 4 x cam bolts (A), 4 x cam locks (B) with a screwdriver. - Page 7 ASSEMBLY STEPS STEP 3. ① Find out the correct drawer rails (F), (G). Fix (F) to the left side of drawer, (G) to the right side using 4 x screws (K). Don't mix up (F) and (G). Attach the handle (E) to the drawer using 2 x bolts (U) with a screwdriver. STEP 4.
- Page 8 ASSEMBLY STEPS STEP 5. ⑧ ⑥ ⑭ ⑦ Attach panels (8), (14) to panels (6), (7) using 2 x wooden dowels (C), 6 x cam bolts (A), 6 x cam locks (B) with a screwdriver. STEP 6. ⑨ ⑩ ⑥ ⑦...
- Page 9 ASSEMBLY STEPS STEP 7. ⑩ ⑦ ⑥ Put the upside down and slide panel (10) into grooves. STEP 8. ⑪ ⑦ ⑥ Attach the bottom panel (11) to assembled unit using 4 x wooden dowels (C), 4 x screws (H) with a screwdriver.
- Page 10 ASSEMBLY STEPS STEP 9. ⑬ ⑫ ⑫ ⑬ Fix 2 x metal parts (13) to 2 x metal legs (12) using 4 x bolts (L) with an Allen Key (N). Attach the assembled metal frame to the assembled unit using 4 x bolts (M). STEP 10.
- Page 11 ASSEMBLY STEPS STEP 11. Fix the wall strap (S) to the furniture using a screw (Q) with a screwdriver. Fasten the furniture to wall using a wall anchor (T) and a screw (R). STEP 12. Final assembly. Contact Us: service@anmytek.com...
- Page 12 WALL FIXING GUIDE NOTE: Supplied wall plugs are only suitable for use in masonry walls. If you have any doubts about using the correct plug for your wall, please seek professional advice. Failure of the product due to using incorrect fixings is the responsibility of the installer. IMPORTANT: When drilling into walls, always check for hidden wires or pipes, etc.
Need help?
Do you have a question about the Mid Century Floating Side Table H0070 and is the answer not in the manual?
Questions and answers