Table of Contents
Advertisement
Hard floor/parquetry: use the hard floor nozzle to
avoid scratching.
For the perfect care of your carpets:
Use the Turbo nozzle. The rotary motion of the
its brush gently loosens where the dirt has been
trodden in on the short pile carpets. It also removes
stubborn fluff and pet hairs.
Removing the contents of the dust
container.
Never operate the cleaner without the dust
container installed.
The dust container must be emptied if the window
of the electronic filter indicator is illuminated when
the cleaner is operating at maximum power and the
nozzle is raised form the floor.
1. Remove the dust container from the cleaner by
pushing the opening button on both sides.
2. Remove the contents of the dust container by
pushing the orange coloured opening button.
3. Close the dust container lid until it clicks.
4. Put the dust container back into the cleaner.
INSTRUCTIONS FOR USE
Cleaning the filters
Filters should be replaced at least twice a year or
when they become visibly soiled.
Always operate the cleaner with filters installed to
avoid reduced suction and the damage of the motor.
Always operate the cleaner with the cartridge
installed. Disconnect from electrical outlet before
changing the filters.
Cleaning the cartridge filter
Remove the dust container from the cleaner by
pushing the opening button on both sides
Rotate the dust container cover counter – clockwise
and pull it out from the dust container.
Remove the cartridge filter by turning it
counter-clockwise and pull it out from the dust
container cover.
Remove the cartridge filter form the cartridge filter
plate by turning it clockwise.
Rinse it under tap water.
Air dry for approximately 24 hours, to ensure it
is completely dry before re-using. Avoid direct
sunlight and extreme drying circumstances (hair
dryer, etc). If you wish to use your appliance while
the cartridge is drying, you may use the extra
cartridge filter inserted in the packaging box.
4.
Hide quick links:
Advertisement
Table of Contents
