Related Manuals for SGS TJ2.5LP
Summary of Contents for SGS TJ2.5LP
- Page 1 TJ2.5LP LOW PROFILE TROLLEY JACK OWNER’S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE.
-
Page 2: Specification
SPECIFICATION SAFETY Part Number: TJ2.5LP Product Weight: 31.5 Kg Brand: SGS Engineering 1. Always read and ensure you fully understand the following precau- tions and the hazards associated with this product. Capacity: 2.5 Ton Closed Height: 80 mm 2. Only use this jack for its manufactured purpose. -
Page 3: Operation
Should any appear, have the jack inspected and repaired by con- 3. Position axle stands directly beneath suitable supporting points under the vehicle, before gently twisting the handle anticlock- tacting us at SGS Engineering. wise. Ensure the vehicle to be raised is chocked and standing on firm, 4. -
Page 4: Maintenance
2. Remove the oil filler plug on the top of the ram assembly. A flat-bladed screwdriver will be required. NOTE: The oil should be almost level with the bottom of the oil filler hole. Oil replacement can be sought by contacting us at SGS Engineering WWW.SGS-ENGINEERING.COM PAGE 6 PAGE 7... - Page 5 TJ2.5LP PARTS DIAGRAM TJ2.5LP PARTS LIST Ref. Description Part No Ref. Description Qty Part No Cylinder Assembly 907389 Screw M12X25mm 907438 Universal Joint Assembly 907459 Back shaft 907403 Steel Ball Bearing Ø 6mm 907458 Nut M12 907437 Oil plug 907457...
- Page 6 SGS Engineering (UK) Ltd Unit 1, West Side Park Raynesway Derby, DE21 7AZ EC Declaration of Conformity This is an important document and should be retained MANUFACTURER’S NAME: SGS Engineering (UK) Ltd Low Profile Trolley Jack TYPE OF EQUIPMENT: TJ2.5LP...
Need help?
Do you have a question about the TJ2.5LP and is the answer not in the manual?
Questions and answers